0755-26712201

Chinese

English

泰科机器人

  • Download

    Techservo Products Selection Manual,Use Manual,Drawings and supporting software download.If you can't download,please contact our relevant business personnel directly.

  • Solutions

    Techservo Products Related Problems or Functional Solutions.If not,please contact our after-sales technical customer service directly....

  • Technical

    Customers use Techservo Series products in the process of common problems set. If not,please contact our after-sales technical customer service directly...

  • FAQ

    Provide related product terminology analysis,solutions and latest technical articles.If you have any other suggestions or comments,please contact our after-sales technical customer service directly...

  • After-sales

    When you encounter problems, please troubleshoot them according to the contents of the list.If it still can't be solved,please contact us directly for after-sales service...

APS Series Precision Programmable Servo Driver Sel...
APS Series Precision Programmable Servo Driver Selection Manual
2018-05-24
APX Series Precision Programmable Servo Driver Sel...
APX Series Precision Programmable Servo Driver Selection Manual
2018-05-24
MT Series Brushless Servo System Selection Manual
MT Series Brushless Servo System Selection Manual
2018-05-24
MT8N42P06V2E Model Motor Size
MT8N42P06V2E Model Motor Size
2018-05-24
MT8N42P10V2E Model Motor Size
MT8N42P10V2E Model Motor Size
2018-05-24
MT8N57P12V2E Model Motor Size
MT8N57P12V2E Model Motor Size
2018-05-24
MT8N57P20V2E Model Motor Size
MT8N57P20V2E Model Motor Size
2018-05-24
CBL Series Air Core Cup Brushless Servo System Sel...
CBL Series Air Core Cup Brushless Servo System Selection Manual
2018-05-24
CBL2040 Model Motor Size
CBL2040 Model Motor Size
2018-05-24
CBL2232 Model Motor Size
CBL2232 Model Motor Size
2018-05-24
CBL2446 Model Motor Size
CBL2446 Model Motor Size
2018-05-24
CBL2453 Model Motor Size
CBL2453 Model Motor Size
2018-05-24
MCK_CVM Indexer Programming Cam Table Control Manu...
MCK_CVM Indexer Programming Cam Table Control Manual
2018-05-24
MCK_CVM Indexer Programming Manual
MCK_CVM Indexer Programming Manual
2018-05-24
MCK_ASCII Programming Manual
MCK_ASCII Programming Manual
2018-05-24
MCK Cam Table Programming Manual
MCK Cam Table Programming Manual
2018-05-24
MCK Software Download
MCK Software Download
2019-03-30

Solutions

Single axis servo - through host control
All techservo intelligent servo drives have programmable features and can be controlled by a main controller system thro... View Details
Uniaxial control - out of host operation...
Techservo intelligent servo drive has powerful motion control function. The complex program of programming is combined w... View Details
Analog input reference or feed...
Through the complete configuration of the software, the analog input of the driver can be used as the input of the TML p... View Details
Pulse digital input
When used as a driver, techservo series intelligent servo drive can accept the pulse control signal sent by the external... View Details
Multiple I/O processing
The PLC specific functions of the techservo intelligent servo allow customers to configure and use the I/O resources of ... View Details
Event and interrupt handling
Techservo intelligent programmable events, combined with the TML specified interrupt structure, allow you to handle diff... View Details
Multi axis cooperative motion
In the distributed multi axis motion control structure, the host provides data points to the axis of the network (CAN&nb... View Details
An electronic gear or cam
Techservo smart drive is programmable as an input command from the pulse + direction (by another motor or othe... View Details
PT/PVT interpolation
Techservo intelligent driver allows programmable location and time interpolation, location, speed, time interpolation, a... View Details
Multi axis I/O handshake
The I/O available on the Techservo smart drive allows you to create a signal handshake structure between the multiple ax... View Details

Technical

A brief introduction to CANopen and Ethe...

CANopen and EtherCAT are international open standard protocols for network motion control. They can simplify connection, reduce cost and enhance diagnostic function. CANope...
View Details
Sinusoidal Electric Vehicle Controller S...

一、Main Features:

1.

View Details
Cam Table Programming
Cam table programming

The electronic cam allows the motion of one axis of a Tyco drive (cam from the shaft) to synchronize with the command or&...
View Details
The motion control of automatic partitio...
The ordinary partition door is propelled manually, and the general automatic partition door adopts ordinary motor or step motor. It has low intelligence, complex wiring, ... View Details
CANopen programming manual for the techs...
With regard to the document:

This paper describes the CANopen method of Tyco Intelligent AP Series Precision Servo Driver. Anyone who participates in the evaluat...
View Details
Communication and test between CANopen P...
For new users of the CANopen application, how to start a CANopen connection is a more complex job, you need to configure the communication parameters, test the communication, and s... View Details
Solution of high speed, high precision a...
The closed-loop stepping servo system has higher safety, reliability and product quality requirements than the traditional open-loop stepping system. A position feedback device is ... View Details
IDM Serial Driver RS232/485/CAN-bus Comm...
This paper describes the communication protocol supported by IDM series servo drives, and describes in detail how the TML (Techservo Motion Language) instruction is a technical ref... View Details
Precision Position Control Algorithm
In the position mode, the reference volume generator automatically eliminates the position error of the rounding. Examples are as follows:

The relative position patt...
View Details
Techservo driver supports the following ...


1. with incremental encoder,AC brushless (permanent magnet synchronous) rotary servo motor position,speed,torque control. AC brushless motor adopts vector...

View Details

FAQ

Why is tech servo driver known as an int...
Based on the latest DSP controller, the series of intelligent servo drives produced by Techservo are embedded in the intelligent motion control language. It only needs to... View Details
Techservo series intelligent servo drive...
Techservo series intelligent servo drives can control the drive DC brushes, DC brushless, permanent magnet synchronous, linear brushless, sound ring, 2 phase stepping mot... View Details
How many control modes do Techservo seri...
Techservo series intelligent servo drives have position, speed, torque (current), voltage and test control mode, which can be freely switched on the basis of motion requi... View Details
I just bought a Techservo intelligent se...
Communication problems commonly encountered by customers usually have several problems:

1, the communication line is not properly connected, or t...
View Details
Do I want to use the motion control card...
Techservo series intelligent servo driver has a pulse + directional standard interface, which can receive control signals transmitted by motion control card or ... View Details
Can techservo series intelligent servo d...
Techservo series intelligent servo drives generally have 2 analog input interfaces, reference analog and analog feedback interface (speed measuring generator), can be +-1... View Details
How does techservo series intelligent se...

Techservo intelligent servo driver can form a multi axis distributed intelligent motion control system through RS232/485/CAN, and a network can support up to 256 ax...

View Details
No hardware installation of shaft ID dri...
You can't use the driver of the hardware set axis ID, or the 32-256 axis ID setting, set up the axis ID by the software, and can set the different axis ID by th... View Details
CanI control Techservo intelligent servo...
You can call the TML_LIB motion function in C/C++, VB, Delphi or LabVIEW development software, communicate with the drive, set drive parameters, get the driver'... View Details
What is the maximum input frequency of t...
The maximum input frequency of the cocoders of the Techservo series intelligent servo drives is 5 MHz, and attention is given to the equivalent of increasing the encoder ... View Details
How do I set up the offline Standalone m...
One of the important advantages of the Techservo series intelligent servo drives is the ability to combine the offline mode (Standalone) with the master slave mode (Maste... View Details
How do I test and diagnose the motion sy...
EasyMotion Studio provides test and analysis of many parameters in motor and actuator in motion system, and evaluation and analysis of performance of motion system. From ... View Details
I need technical support. Where can I ge...
You can contact us through Email, phone, and we can provide you with some application examples, or help you to succeed in the shortest possible time through Int... View Details

After-sales

Input Order Number Query Progress

Contact US

  • Telephone:0755-26712201 0755-26712221
  • Fax:+86-755-26712958
  • Email:sales@techservo.com
  • Address:5th Floor,12 Blocks,Nangang NO.2 Industrial Zone,
    1026 Songbai Road,Nanshan District, Shenzhen
  • Sweep and search
    Pay attention to Techservo
    techservo
    You have one more servo selection channel

Message

If you are interested in Techservo Products,please leave your contact information so that we can contact you.

Copyright © 2019 Techservo(Shenzhen) Co., Ltd..All Rights Reserved. 粤ICP备09089119号-5