Support Hotline:


Copyright ©2018 Shenzhen Tyco Intelligent Servo Technology Co., Ltd.

APXS Series Programmable AC/DC Full Digital Servo Driver

APXS Series Programmable Precision Servo Driver is a general purpose, high performance, AC/DC power supply, compact digital servo driver with maximum power up to 1KW. It integrates programmable motion control, PLC and servo drive functions. Mainly used in linear (DDL), torque (DDR), voice coil, brushless, brushless servo motor position, speed, torque control. It can operate in three modes: Stand-alone, external control or distributed network control. It can support incremental encoder, Sin/Cos encoder and Resolver feedback.

    Technical Parameter

    Servo Driver Series APXS Series DC/AC Programmable Servo Drivers
    Driving Motor Linear (DDL), Torque (DDR), Voice Coil, Brushless and Brushless Servo Motors
    Control Mode Motion Sequence, Point-to-point, PVT, Electronic Gear, Cam, Position, Speed And Torque
    Independent Programmable Control A Simple And Visual Programming Tool
    32 Programmable Motion Sequences
    Programmable Priority, Which Can Be Selected And Executed By Digital Input or 32 Registers
    32 Registers Can Be Accessed Through Rs232/Can Communication
    Programmable Power-on Automatic Operation Program
    Programmable Motion Error Response Types
    External Control Commands Step/Dir, Cw. /Ccw, Single-ended or Differential Input, Maximum Speed 2m)
    Position, Velocity And Torque Of +-10v Analog (Differential Input, 12-bit Resolution)
    PWM Speed And Torque (1-100khz, Minimum Pulse Width 220ns)
    Encoder A/B, Maximum Rate 2m Line/S (8m After 4-fold)
    Distributed Network Control RS232/CAN Communication ASCII
    CANopen DS402
    Up To 127 Sites
    Communication Type RS232、CAN
    Input And Output 1 +10v Analog Input
    12 Digital Input,No Optical Barrier.One Enabler Specific And 11 Programmable Universal
    Four Digital Programmable Outputs,No Optical Barrie
    Feedback Orthogonal Incremental Encoder,Maximum Rate 5m Line/S (20m After 4x)
    Digital Hall (U, V, W, 120 Degree Electrical Phase Difference)
    Analog Sin/Cos Encoder Optional
    Reslover is optional
    Encoder 2 Input or Output (Full Closed Loop Control)
    Logical Supply Voltage 18-30VDC
    Motor Supply Voltage 80-240VAC/100-340VDC
    Protection Design Overcurrent,Short Circuit,Grounding,Overvoltage,Undervoltage,Overtemperature,I2t,Control Error

    Model Selection

    Servo Driver Model Supply Voltage
    Continuous Current
    Peak Current
    Encoder Typ
    APXS-05A230-CALTE 80…230 5 10 154 x 102 x 53mm Incremental Encoder
    APXS-05A230-CALTSC 80…230 5 10 154 x 102 x 53mm Sin/Cos Encoder
    APXS-05A230-CALTR 80…230 5 10 154 x 102 x 53mm Resolver